公告内容
项目编号
立即查看
项目预算
立即查看
采购单位
立即查看
供应商
立即查看
采购代理
立即查看
公告详情
您当前为:【游客状态】,公告详情仅对登录用户开放，
登录/注册
后查看完整商机。全国免费咨询热线:400-888-7022南山集团招标信息
| 招标信息 | |||
|---|---|---|---|
| 招标单位 | 电力公司 | 项目名称 | 电力公司阀门 |
| 招标联系人 | 无 | 手机 | 无 |
| 联系电话 | 无 | 联系邮件 | zhaobiao@nanshan.com.cn |
| 质保期 | 报名截止日期 | ||
| 招标邮箱 | zhaobiao@nanshan.com.cn | ||
| 竞标保证金信息 | |||
|---|---|---|---|
| 项目保证金 | 5000.00元 | 帐户名称 | 山东新南铝材科技开发有限公司 |
| 帐号 | 233832812142 | 开户行 | 中国银行龙口南山支行 |
| 备注 | |||
| 备注：竞价保证金汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。 | |||
| 供应审计部招标联系人信息 | |||
|---|---|---|---|
| 标书联系人 | 无 | 办公电话 | 无 |
| 邮件 | 无 | ||
| 标书汇款相关信息 | |||
|---|---|---|---|
| 账户名称 | 无 | 账号 | 无 |
| 开户行 | 无 | 行号 | 无 |
| 标书收费标准 | 地址、电话 | 无 | |
| 备注：标书费汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。注明标书费的用途或投标项目名称。 | |||
| 物品名称 | 规格型号 | 数量 | 单位 | 描述 |
|---|---|---|---|---|
| 鹅颈阀门 | 详见注释 | 33.00 | 台 | {"规格型号":"349614-0041/IR-3D","公称压力":"4MPa","公称通径":"DN89mm","连接方式":"法兰连接","驱动方式":"无","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"371℃","输送介质":"蒸汽 水","材质":"铸钢","国产/进口":"国产","特殊要求":"1.尺寸要求:下部法兰外径:192mm,内径89mm,上部法兰外径118mm,内径50mm.2.原生产厂家:湖北戴蒙德电力机械有限公司.3.配有压力调节盘,可调节低压介质的压力和流量.4.适用于IR-3D型炉膛吹灰器.5.不合格品处理标准:如到货不符合技术要求,由供应商无条件进行更换,退货处理.","使用寿命":"365天","参照标准":"JB/T 8501-1996","备注":"按要求完善选项参数"} |
| 法兰截止阀 | 详见注释 | 4.00 | 个 | {"规格型号":"J41H-25/DN25","序列号":"无","公称压力":"2.5MPa","公称通径":"25mm","连接方式":"法兰连接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤425℃","输送介质":"水、蒸汽、油品","主体材质":"阀体WCB，阀座密封面2Cr13，阀杆1Cr13","国产/进口":"国产","生产厂家":"任意阀门生产厂家","特殊要求":"阀门铭牌、合格证标注清楚（包括阀门名称、型号、通径、压力、温度、出厂编号、生产厂家等）","使用寿命":"≥730天","参照标准":"GB/T 12235-2007","备注":"不合格品处理标准：当验收不符合技术要求时，供货商必须更换合格产品。"} |
| 焊接式截止阀 | 详见注释 | 10.00 | 个 | {"规格型号":"J61Y-320/DN50","序列号":"W无","公称压力":"32MPa","公称通径":"50mm","连接方式":"焊接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无执行机构","执行机构与阀门连接尺寸":"无","工作温度":"≤425℃","输送介质":"水、蒸汽","主体材质":"WCB","国产/进口":"国产","生产厂家":"任意生产厂家","特殊要求":"到货后如不符合技术要求,供应商应无条件给予更换、退货","使用寿命":"1460天","参照标准":"GB/T 12233-2006"} |
| 气动陶瓷耐磨旋转进料阀 | 详见注释 | 2.00 | 个 | {"规格型号":"BZY643TC-10C/DN200-390","材质":"阀体为WCB,密封面为陶瓷,气缸材质：缸体为合金铝制，缸盖为压铸铝，活塞杆为45#钢镀硬铬, 活塞密封圈为聚氨酯材料，密封为密封圈QYD耐高温氟胶圈加O型丁晴橡胶","公称通径":"200~390mm","公称压力":"1Mpa","进口压力":"0.6Mpa","出口压力":"0.6Mpa","适用温度":"180℃","介质温度":"60℃","流量":"不限","常用流量":"不限","连接方式":"法兰连接","适用介质":"煤灰","气源压力":"0.1-0.9Mpa","管道尺寸":"DN200-390","电动执行机构":"无","开关速度":"无","是否配带电动执行器":"否","使用电压":"无","反馈信号":"信号灯反馈","国产/进口":"国产","生产厂家":"北京市阀门总厂股份有限公司","特殊要求":"气缸工作压力：0.1-0.9MPA ， 保证耐压力：1.35ＭＰＡ，气缸工作温度：-5~70℃，气缸内径：125mm 行程：228mm阀门压力：PN1.0MPA 阀门通径：200mm进料阀上法兰：DN200下法兰：DN390非标下法兰盘外径520mm，16个Φ22螺孔，孔中心距458mm， 温度≤180℃ ，安装尺寸（法兰间距）：280mm连接方式：法兰连接 ， 气缸上配好插入式10mm软管接头，流通介质：煤灰，使用寿命365天，到货物资与技术要求不符，供货商应给予免费退换货处理。","参照标准":"GB/T 12228-2006","备注":"根据公司规定，完善该物资技术要求"} |
| 电动闸阀 | 详见注释 | 2.00 | 个 | {"规格型号":"Z941H-25C/DN200","公称压力":"2.5MPa","公称通径":"200mm","连接方式":"法兰","驱动方式":"电动","是否配带执行机构":"否","执行机构型号":"ZW30","工作温度":"425℃","主体材质":"WCB","特殊要求":"执行机构与阀门连接尺寸，需现场测量","参照标准":"GB/T 12234-2007"} |
| 全衬氟蝶阀 | 详见注释 | 2.00 | 个 | {"规格型号":"D371F46-10C/DN200","公称压力":"1MPa","公称通径":"200mm","连接方式":"对夹式","密封方式":"氟塑料密封","驱动方式":"手动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤150℃","输送介质":"强酸、强碱、强氧化性介质","主体材质":"铸铁","内衬材质":"F46","国产/进口":"国产","特殊要求":"阀体形式：垂直式阀体； 传动方式：蜗轮式","使用寿命":"≥1095天","参照标准":"GB/T 12238-2008","备注":"验收标注:到货需带合格证,外观无缺损,密封严密,阀体表面无锈蚀,开关灵活无卡涩,无明显制造缺陷.不符合要求厂家要无条件给予退货或换货."} |
| 气动出料阀 | 详见注释 | 3.00 | 个 | {"规格型号":"CPZ648C-16/DN150","公称压力":"1.6MPa","公称通径":"150mm","连接方式":"法兰连接","驱动方式":"气动","适用电压":"无","气源压力/液体压力":"0.1~0.9MPa","反馈信号":"信号灯反馈","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无要求","工作温度":"≤180℃","输送介质":"煤灰","材质":"阀体为WCB,密封面为陶瓷 阀板为双闸板","国产/进口":"国产","特殊要求":"气缸工作压力:0.1~0.9 MPa 保证耐压力:1.35 MPa 气缸工作温度:-5~70℃气缸缸径:100mm 行程:103mm 阀门压力:PN1.6 MPa 阀门通径:150mm 温度≤180℃ 安装尺寸(法兰间距):280mm 气缸上配好插入式10mm软管接头。","使用寿命":"730天","参照标准":"JB/T 10529-2020","备注":"气缸材质:缸体为合金铝制/缸盖为压铸铝/活塞杆为45#钢镀硬铬 活塞密封圈为聚氨酯材料/磁性活塞为合金铝和金属磁环/端盖密封为密封圈QYD耐高温氟胶圈加O型丁晴橡胶，备件到货附带产品合格证，不合格处理标准：如不符合技术要求，予以退换货处理。产生费用由供货商负责。"} |
| 止回阀 | 详见注释 | 2.00 | 个 | {"规格型号":"H44H-25C/DN125","公称压力":"2.5MPa","公称通径":"125mm","连接方式":"法兰连接","驱动方式":"自动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~425℃","输送介质":"蒸汽、高温水等","主体材质":"WCB","国产/进口":"国产","特殊要求":"1、提供产品合格证和到货清单。2、来货如与技术要求不符或存在质量问题，供应商无条件给予免费退换货处理。","使用寿命":"1095天","参照标准":"GB/T 12236-2008"} |
| 电动截止阀 | 详见注释 | 4.00 | 个 | {"规格型号":"J941H-25/DN50","序列号":"无","公称压力":"2.5MPa","公称通径":"50mm","连接方式":"法兰连接","驱动方式":"电动","是否配带执行机构":"否","执行机构型号":"ZW10","执行机构与阀门连接尺寸":"中心距：Φ120mm","工作温度":"0~425℃","输送介质":"水、蒸汽等","主体材质":"WCB","国产/进口":"国产","生产厂家":"所有阀门生产厂家均可","特殊要求":"1、来货阀门必须与原电动装置装配合适。2、原电动装置接口尺寸如上图所示。","使用寿命":"730天","参照标准":"GB/T 12235-2007","备注":"1、供应商提供产品合格证、供货清单。2、验收标准：来货如与技术要求不符或存在质量问题，供应商无条件给予免费退、换货处理。"} |
| 高压差调节阀 | 详见注释 | 2.00 | 个 | {"规格型号":"T969Y-320/DN50","材质":"WCB","公称通径":"50mm","公称压力":"32Mpa","进口压力":"17.8Mpa","出口压力":"0.8Mpa","适用温度":"≤425℃","介质温度":"360℃","流量":"16.5T/h","常用流量":"水、蒸汽","连接方式":"焊接","适用介质":"水、蒸汽","气源压力":"无气源Mpa","管道尺寸":"76*5mm","电动执行机构":"调节型执行器","开关速度":"6s","是否配带电动执行器":"是","使用电压":"380VAC","反馈信号":"4~20mA","国产/进口":"国产","生产厂家":"通用阀门生产厂家","特殊要求":"使用寿命：1460天，验收标准：到货后如不符合技术要求，供应商应无条件更换、退货。","参照标准":"GB/T 10869-2008"} |
| 截止阀 | 详见注释 | 2.00 | 个 | {"规格型号":"J41H-100/DN50","序列号":"无","公称压力":"10MPa","公称通径":"50mm","连接方式":"法兰","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"150℃","输送介质":"水、汽","主体材质":"15crMo","国产/进口":"国产","生产厂家":"任意厂家","特殊要求":"无","使用寿命":"730天","参照标准":"GB/T 12235-2007"} |
| 衬胶法兰蝶阀 | 详见注释 | 3.00 | 个 | {"规格型号":"D941X-6Q","公称压力":"0.6MPa","公称通径":"700mm","连接方式":"法兰连接","密封方式":"橡胶软连接","驱动方式":"电动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"连接法兰:300mm,螺栓中心距:254mm±2mm,螺栓孔:20mm±0.5mm*8","工作温度":"≤80℃","输送介质":"石膏浆液","主体材质":"阀体:球墨铸铁,阀板:2507双相不锈钢","内衬材质":"三元乙丙橡胶","国产/进口":"国产","特殊要求":"轴头尺寸:Ф55*72mm,键口尺寸,16*50mm","使用寿命":"≤1095天","参照标准":"GB/T 12238-2008","备注":"验收标准:来货附带合格证,材质检验报告.所供货物无锈蚀,裂纹,表面光洁,密封接触面无破损残缺,结合严密无加工缺陷及工艺缺陷.达不到技术要求供货商无条件予以更换或退货.\n注:阀门厚度（不算衬胶）:292mm±5mm,管道连接法兰螺栓孔距:810mm±2mm螺栓孔径：27mm±0.5mm。\n中标厂家需到现场实际测量具体尺寸。"} |
| 旋启式衬胶止回阀 | 详见注释 | 1.00 | 个 | {"规格型号":"H44J-10/DN250","公称压力":"1.0MPa","公称通径":"250mm","连接方式":"法兰连接","驱动方式":"水力驱动","适用电压":"无","气源压力/液体压力":"无","反馈信号":"无","是否配带执行机构":"无","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≤85℃","输送介质":"海水","主体材质":"碳钢","国产/进口":"国产","特殊要求":"阀门阀体：碳钢衬胶。阀瓣：碳钢衬丁晴橡胶 总长度550mm","使用寿命":"＞730天","参照标准":"GB/T 13932-2016","备注":"到货验收：包装完好，外观完好无损，带有合格证。如所送到物品不符合技术要求或质量不合格，供货商必须无条件退换货，由此产生的费用由供货商负责。"} |
| 插板阀 | 详见注释 | 4.00 | 个 | {"规格型号":"DN250","序列号":"无","公称压力":"1.0MPa","公称通径":"250mm","连接方式":"对夹法兰连接","驱动方式":"手动","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"0~80℃","输送介质":"粉煤灰","主体材质":"阀体为灰铸铁，阀板为不锈钢（304），阀杆为碳钢，密封面为硬质合金(STL)","国产/进口":"国产","生产厂家":"所有阀门生产厂家均可","特殊要求":"阀门厚度70mm，螺孔中心距355mm","使用寿命":"＞365天","参照标准":"GB/T 12232-2005","备注":"验收标准：到货与技术要求不符时，供应商无条件退换货处理。"} |
| 针型阀 | 详见注释 | 20.00 | 个 | {"规格型号":"J13W-160P/M20*15","公称压力":"16MPa","公称通径":"15mm","连接方式":"螺纹连接","丝扣连接尺寸":"内螺纹，两种不同连接G1/2-M20*1.5","工作温度":"-29~538℃","输送介质":"天然气","主体材质":"304不锈钢","国产/进口":"国产","特殊要求":"无","使用寿命":"1825天","参照标准":"GB/T 12224-2015"} |
| 气动陶瓷耐磨旋转进料阀 | 详见注释 | 3.00 | 个 | {"规格型号":"BZY643TC-10C/DN200","公称压力":"0.1-0.9MPa","公称通径":"200mm","连接方式":"法兰连接","驱动方式":"气动","适用电压":"无","气源压力/液体压力":"0.1-0.9Mpa","反馈信号":"信号灯反馈","是否配带执行机构":"否","执行机构型号":"无","执行机构与阀门连接尺寸":"无","工作温度":"≮180℃","输送介质":"煤灰","主体材质":"材质要求：阀体为WCB，密封面为陶瓷,气缸材质：缸体为合金铝制、缸盖为压铸铝、活塞杆为45#钢镀硬铬 活塞密封圈为聚氨酯材料、磁性活塞为合金铝和金属磁环、端盖密封为密封圈QYD耐高温氟胶圈加O型丁晴橡胶","国产/进口":"国产","特殊要求":"气缸工作压力：0.1-0.9MPA ，保证耐压力：1.35ＭＰＡ，气缸工作温度：-5—70℃，气缸内径：125mm，行程：228mm，阀门压力：PN1.0MPA阀门通径：200MM，进料阀上.下法兰：DN200，阀门耐温≮180℃，安装尺寸（法兰间距）：305mm，连接方式：法兰连接，流通介质：煤灰，气缸上配好插入式10mm软管接头。","使用寿命":"≥365天","参照标准":"GB/T 12228-2006","备注":"到货物资与技术要求不符，供货商应给予免费退换货处理。"} |
| 蜗轮蝶阀 | 详见注释 | 2.00 | 个 | {"规格型号":"D371X-16/DN80","公称压力":"1.6MPa","公称通径":"80mm","连接方式":"对夹式","驱动方式":"涡轮","工作温度":"-15~150℃","主体材质":"铸铁","内衬材质":"氟橡胶","国产/进口":"国产"} |
| 法兰截止阀 | 详见注释 | 8.00 | 个 | {"规格型号":"J41W-16P-PN16-DN32","序列号":"-","公称压力":"PN16","公称通径":"DN32","连接方式":"法兰","驱动方式":"手动","是否配带执行机构":"-","执行机构型号":"-","执行机构与阀门连接尺寸":"-","工作温度":"0~80℃","输送介质":"水","主体材质":"0Cr18Ni9","国产/进口":"国产","生产厂家":"-","特殊要求":"-","使用寿命":"3650天","参照标准":"GB/T 12235-2007","备注":"如到货质量与技术要求不符，退货或换货处理，退换货产生的费用，由供货方承担；因为配件质量原因造成公司经济损失的按照供应公司相关规定进行处罚。"} |
| 电动蝶阀 | 详见注释 | 2.00 | 台 | {"规格型号":"D943Y-16C DN400","公称压力":"1.6MPa","公称通径":"400mm","连接方式":"法兰连接","密封方式":"硬质合金密封面","驱动方式":"电动","适用电压":"380V","气源压力/液体压力":"无","反馈信号":"反馈开关信号，执行器状态反馈信号","是否配带执行机构":"是","执行机构型号":"DZW","执行机构与阀门连接尺寸":"与阀门配套","工作温度":"100℃","输送介质":"惰性气体、汽液混合物","主体材质":"WCB","内衬材质":"无","国产/进口":"国产","特殊要求":"阀体标注规格型号，电动执行机构为整体型，电动执行机构防护等级为IP65；","使用寿命":"＞365天","参照标准":"JB/T 8527-2015","备注":"验收标准：图片供参考\n1.附材质报告及合格证明。\n2.驱动运行顺滑无卡涩；密封面无影响使用的缺陷。\n3.阀门盘根、阀体连接密封能达到压力要求不泄露。\n4.存在与技术要求不符，要求厂家退换货处理，直至合格为止，所产生的费用由厂家承担。因产品质量原因在使用过程中达不到使用寿命，所造成的损失由厂家承担。"} |
| 投标厂商资质 | |||
| 注册资金 | 专业资质 | ||
| 公司业绩 | |||
| 相关认证 | |||
| 其他 | |||
| 联系我们 | |||
| 供应采购电话 | *开通会员可解锁* | ||
| 地址 | 山东省龙口南山工业园南山集团总部办公楼 | ||
南山集团有限公司
潜在客户预测
点击查看详情>
合作机会
合作伙伴等你一起赚钱>
400-888-7022
APP下载
小程序
公众号
